Week in Review 2025 – 05/23

Obsessed

I am obsessed. I cannot stop thinking about the Bernina 990 and wondering whether it will be the solution to my being able to continue to quilt after we have downsized. It is embarrassing to admit the hours I have spent researching the 990 via videos and write ups. There seemed to be only one solution to resolving whether the 990 would or wouldn’t suit my needs. I had to test drive it.

Bernina 990

The Bernina 990 set up for sewing

On Wednesday, the SEDOSO (Senior Executive Director of Studio Operations) and I set out to run some errands. These included going to the local Bernina dealer to test drive the 990. Be still my heart, there was my obsession, the very first machine in a room full of Berninas, Janomes and Babylocks. One of the reasons I am obsessed with this dealer, is their staff. Carol, patiently sat with me for two hours helping navigate the machine and passing me various feet as I requested them.

I came prepared for my time at the dealer with a 27″ square quilt sandwich and a guide of lessons to learn about the machine. This allowed me to play with various stitches and techniques. Although I rarely use decorative stitches, I do love them. The 990 has several nifty features. For example, you can sew in any direction without changing the direction of your fabric. No need to pivot. You simply choose the direction by degrees on a circle. Another nifty trick is creating a chain of repeating decorative stitches. That is what I did in the middle image. It also comes with basic quilting motifs. I tested the stipple stitch. I will stick with my own free motion stippling.

But will it work?

My number one question, the one I was obsessed with figuring out, was could I free motion quilt with the quilt sandwich in a hoop, or would the hoop need to be secured to the bed of the machine? The answer is I can! I probably won’t do this, BUT, this will make my thread painting easier and allow to me thread paint bigger images.

Free motion quilting in a hoop

No doubt, I will return to the dealer for more test driving. I didn’t get to play with the embroidery features, or learn how to change the size of a quilting pattern to fit a block using the laser pointer. Doesn’t that sound cool? There is no rush. I may be obsessed, but I can wait for a year or so.

What does SEDOSO have to say about this? He was heard chatting with another patron who asked him what he thought about my purchasing the Bernina 990. He said, unequivocally, “She can have whatever machine she wants.” I have said pretty much the same thing to him as he has purchased various tools and machines over the years for woodworking and home maintenance.

Rainbow Scrap Challenge

Last week I shared that I was going to buckle down and return to quilting my 2024 Rainbow Scrap Challenge quilt. The following image shows just what a monster it is. Basically, it is king sized, or 119″ by 105″. I haven’t weighed it, but it is very heavy. Probably, the heaviest quilt I have ever quilted without sending it to a longarmer.

That’s the 2024 Rainbow Scrap Quilt during one of my last work sessions on it.

A big thank you to Diann, who shared my determination to pull out her 2024 Rainbow Scrap Challenge quilt and quilt it. There is something about a shared commitment that provides impetus.

Quilting my 2024 Rainbow Scrap Challenge quilt

The video is a 12 second clip of me free motion quilting what I think of as the white setting strips in the quilt. I’m proud to say that this portion of the quilting is 100% done. Here is a still image, just in case you can’t run or see the video.

Obsessively quilting my 2024 Rainbow Scrap Challenge quilt

I’m linking up to the following posts:

By Gwyned Trefethen

I am an artist who uses fabric, thread and miscellany to create designs gifted to me by my imagination.

30 comments

  1. What a beautiful, specious studio you have! That 990 is soooo cool. I can only imagine what you could do with it. You married well girl, “take any machine”!

    1. Yes, I have been very fortunate with my studio space in our current and previous home. The SEDOSO and I will be married for 50 years next month. We have always supported each other’s interests and pursuits. Did you get to beta test the 990 as a Bernina ambassador?

  2. Good for you to test drive the Bernina 990! Planning ahead is always the way to go and what a great dealer to spend the time with you while you played!

    1. It is a busy dealership. They have been in business since 1984. I’ve used them to clean my Bernina 1260 since the early ’90’s. It continues to be an active shop. They have a few quilting supplies and a classroom in the back. When I was there on Wednesday they were hosting an open sewing day. A few people came in to have their machines serviced, a few more to check out machines. I was the sole person who actually test drove a machine. Others looked at machines and asked questions. What has stood out is their service and knowledge. The 990 is relatively new to Carol. One of the reasons she hung out with me, so she could learn, too. Of course, she knows earlier iterations of Bernina which makes working with the latest less of a jump for her than for me.

  3. I’m so glad you found a machine that will work for you when you downsize your studio, and a good dealer to purchase it from. That makes all the difference! And I’m glad, too, that you had some time to work on quilting your 2024 project. It was fun to have a little challenge between us – it kept me accountable! I’ll share my quilting in tomorrow’s post.

  4. How fun, a new machine in your future! Good luck on your goal, my 2024 is still in block form in a box. LOL

    1. You’re off to a great start by having all your blocks completed, Chris. I’m fortunate to have the incentive of annual open studio. I try to have new work on display. Now that I have participated in the RSC for several years, I think I might have enough quilts to make a series/grouping of them.

  5. I have tried to learn to free motion quilt several times without success. I love quilting with my walking foot and do that with almost small of my quilts except for the bed sized ones. They go to the long armers. It’s good to test drive a new machine before purchasing. My husband is very supportive of my sewing and crafting projects and doesn’t bat an eye when I purchase something new. He actually searches out quilt stores I might like when we are on vacation. Your RSC quilt is huge! Can’t wait to see your progress on it.

    1. Like you, Gail, I struggled with FMQ for years. Eventually I could do a good stipple and leaf shape. What finally did it for me was taking Leah Day’s QAL. She not only broke down various patterns, but helped with things like how to navigate around a quilt, deal with awkward areas and scale. That was ~ 2011. One of the best things I did was not give up. That and practice, practice and more practice.

      Yes, some of us are fortunate enough to partner with people who encourage our interests. Happy you are one of those.

  6. The 990 sounds like a great machine, I don’t know if I could wait another year to purchase it. I look forward to viewing the finished 2024 RSC quilt, happy stitching!

    1. I may not be waiting another year. Seems the SEDOSO thinks I should give it one more test drive and if I still like it, buy it now. It won’t handle a mammoth quilt, though. I figure anything in the 40 – 60 inch range should be doable. I am Bernina loyal. So, I tend to be prejudice. They just do so many things right. Much as changed but the basics are still the same. So, the transition might not be torture.

      1. “Transition MIGHT not be torture?” HAHAHA, says the girl who is already several months into transitioning from my B 790 Plus (already a great Bernina) to the new B 990. How did you like how it actually sews? I am enjoying how smooth and quiet the new machine runs, and I am in love with the new needle threader. I find myself using that laser a lot more than I thought I would; it was delightful for sewing patchwork Y-seams and I’ve also noticed that the B 990 doesn’t take that annoying additional stitch before changing directions (from forward to reverse) like all my other Berninas did. I have done nothing with my 990 so far except piecing but I’m loving it so far. So, how did you like the feel of free motion quilting on the B 990 compared to FMQ on your George at home? Did you get to play with all of the different stitch regulator options or were you just test quilting in manual mode? And I’m curious about the use of a hoop for FMQ. Do you mean one of those old school hoops like our grandmothers used for hand quilting and embroidery, or is this some kind of hoop designed specifically for use with free motion machine quilting? In the photo of you quilting your RSC on George, I didn’t see any kind of hoop. FWIW, quilters like Harriet Hargrave and Diane Gaudynski managed to quilt enormous bed quilts on regular domestic sewing machines way before the manufacturers started “super-sizing” regular sewing machines for quilters. With the right kind of cabinet/table setup for support, you might be surprised how big of a quilt you could handle on the B 990. I’m excited for you!

        1. I went back to read the post you wrote shortly after trading in two machines for the B 990. Seems our rationals for considering the B990 are similar. Reduce the number of machines to accommodate a smaller space.

          I was so busy learning where all the buttons were, what the symbols meant and understanding the software I didn’t notice the sewing. I see this as a good thing. If there had been a problem it would have caught my attention. No problem means a can put a tick mark in ease of sewing. That being said I was surprised by how few feet, at least according to the Bernina website come with the machine, particularly what I consider must have B quilting feet, such as #37, the quarter inch foot and another favorite, #20, an open toe foot. Perhaps the retailer and I can negotiate, especially if I buy a cabinet and machine.

          The FMQ on B 990 was easy. However, since the B 990 is on top of table vs. inset into a cabinet it isn’t a fair comparison. There are several downsides to George. I bought it just before ruler work became the rage. Without going into details retro fitting George for ruler worker is not a good idea. Also, George only takes an 80 needle. I want to be able to use a finer needle, which the 990 can handle. This is especially necessary for thread painting. Yes, I did try out the BSR, didn’t bother with different speed set ups and tried without the BSR. Since I have been FMQ for just shy of 15 years, the BSR didn’t do much for me. Although, who knows, that may change.

          No, I can’t hoop my quilt on the George or B 1260 because the height of the rim doesn’t fit under the needle and foot. The hoop I was referring to is the one that comes as part of the embroidery package with the 990. What I love is that rim gives good hand hold and the small and medium size fit nicely within the throat.

          Harriet Hargraves is my idol. OK one of many. I took a class with her at the Minnesota Quilt Show in the late ’90s. She was the keynote speaker. Talked about batting and her work to get Bernina to take quilters seriously. Her speech was 45 minutes or so. I was riveted. She was also a kind, supportive teacher. As for Diane Gaudynski, I’ve never met her, but have studied her work and own on of her books. Love her work.

          What did you opt for in a cabinet/table for your 990?

    1. I am a firm believer in test driving a sewing machine. I was surprised by the other patrons who looked at the machines and asked about features, but didn’t sit down and play themselves. Thank you for the well wishes.

  7. Wow, this sewing machine looks fantastic and I’m glad that you could test it so deeply. Before purchasing mine, I spent hours and hours comparing different machines and brands, trying to find the one that ticked the most boxes on my long list of mandatory and imperative criteria!
    Have fun quilting RSC 2024! Thank you for sharing and linking up.

    1. Precisely, Frédérique. I also spent hours comparing and contrasting various brands. Most important for me was the throat. Much as I LOVE my Bernina 1260 it has ~ 8″ of throat space. It was next to impossible to FMQ anything with a side longer than 30″. There was no room to maneuver. Whereas the Bernina 990 has a 14″ throat. It has boiled down to the Janome M8 or the Bernina 990. Either would probably work, but there are so many more possibilities with the 990 and I believe the learning curve will be less arduous. It is vital to do the research, then verify it before making a purchase.

  8. Beautiful new machine and will be like a shot in the arm, as they say. I wish I had a SEDOSO…sounds like a handy one to have. Good luck with your continued quilting of your lovely quilt.

    1. I believe you do have a SEDOSO, Jocelyn, just one who supports you in different ways than mine. 🙂 I am very fortunate to have a partner who encourages my interests, helps problem solve, runs errands and so much more. He is also aware that without me to manage the home front our children, he wouldn’t have been able to have the career he had. We have a symbiotic relationship.

      Thank you for the well wishes.

  9. I can’t wait to see the finished quilt from last year as I was drooling over the blocks every month!

  10. Hi Gwyned, quilting such a large, heavy quilt is quite the job. I’m glad that it’s going well. Good luck with your decision on a new machine 🙂

    1. Thank you, Andrée. I really should put the quilt on a scale. I think I will wait until it is finished and all the pins are removed. I baste with safety pins and fusible webbing. Thank you for your encouragement.

  11. I won’t even dream of having a machine like the Bernina 990. Wow! My local quilt store also lets you test drive the machines that you are interested in buying. I hope to purchase something soon that is a little more upscale than my 20 year old Kenmore.

    1. How exciting Cathie. Check out Frédérique’s comment. She, like me, spent ages doing research first. What are your must haves in machine? What do you wish to continue doing? Is there any new area you would like to venture into that isn’t possible on the Kenmore? Whatever you decide, enjoy the process and then the new machine.

  12. The new Bernina sounds amazing! In some ways, I still live in the previous century: the sewing machine I always use is my mother’s circa 1938 old, black, 201 Singer. It’s perfect for what I need, and I think the 990 will probably be perfect for what you need. Enjoy your further testing of it.
    Congrats on quilting your 20214 RSC quilt. I hope you’ll post photos when you’re finished!

    1. My first sewing machine I ever saw was my mother’s Singer. Not sure of the model. Very portable, black with that stunning gold scroll work. It could have been a 1938, give or take 5 years, maybe more. She would make dresses and suits from Vogue patterns. It was an economical thing for her, a way to be stylish without paying designer prices. She had no passion for dressmaking. I did love the look of that Singer. Those old Singers were work horses. Love that you and your Singer are BFFs. I believe quilters and sewers should be as one with their machines.

  13. I like SEDOSO and his attitude!! I hope the machine is the right one for you. and wow!! Look at you quilting that big ol thing! I am impressed

Comments are closed.